122
Safety guidelines
1.7 Embroidering
Do not remove any machine covers – they are provided for your
safety. See Machine overview.
As a general principle, operate the machine from the front long side. Each time
before starting the machine, make certain that nobody is in the vicinity of its
moving parts.
Abb. 1: Work areas
Users are allowed to enter this area (1) only when the machine is switched o.
This area (2) can be entered for monitoring purposes while the machine isrunning.
Keep hands away from moving parts during embroidering. There is a risk of
serious injury especially in the vicinity of the needles, borers, take-up levers and
rotary hooks.
Stop the embroidery machine before all manual operating procedures at
the machine, even when simply removing u or loose threads from the start of
embroidery. Consider your own safety at all times.
Never thread the threads while the machine is running.
1
2
To Next Page
Loading...
