198
Preparing to embroider
14.1.2 Border embroidery
- Caution! - The pantograph travels at a very high speed.
Do not rest on the work table or lean against the table recesses
within the working range of the pantograph (Abb. 46) A collision
with the high-speed pantograph can cause bruising and injuries
resulting from crushing or shear forces. (Abb. 47).
Clamping element, tting
Make sure that the clamping elements lie absolutely at other-
wise the presser feet will be damaged as they pass over.
Pull clamping prole (2) of clamping
element (1) over the cloth from the
inside towards border frame (4) until
contact is made.
Pull the border clamp over angle rail
(3) overcoming the spring resistance,
until it engages.
Abb. 83: Clamping element, tting
3
4
1
2
To Next Page
Loading...
