189
Changing modes
13. Changing modes
This part of the operator’s guide refers exclusively to machines with
tubular system functionality.
- Caution! - The pantograph travels at a very high speed.
Do not rest on the work table or lean against the table recesses
within the working range of the pantograph (Abb. 46) A collision
with the high-speed pantograph can cause bruising and injuries
resulting from crushing or shear forces. (Abb. 47).
13.1 Changing from border frame to tubular system embroidery
The conversion is not to be carried out when the machine is running.
Abb. 68: Operating mode, examples
Left: border frame mode with optional sequin device
Right: Tubular system embroidery
To Next Page
Loading...
