152
Preparing to embroider
Clamping embroidery material in the frame
Abb. 41: Tubular system embroidery, clamping tubular fabric in cylinder arm frame
Place outer frame (1) underneath
the area that you wish to embroider
(between the two layers of tubular
fabric).
Apply pressure with the ball of the
thumb to press inner frame (2) into
the outer frame from above so that
the embroidery material is stretched
smoothly over the frame.
Abb. 42: Tubular system embroidery, screw for
adjusting frame tension
Optional clamping aids are available to facilitate clamping the
embroidery material in the cylinder arm frame.
1
2
To Next Page
Loading...
