199
Preparing to embroider
Clamping elements with locking mechanism
Make sure that the locking mechanism on the clamping element
is securely engaged before starting up the machine. Otherwise
damage may be caused to the embroidery material, embroidery
head or any auxiliaries (e.g. sequin attachment).
Depending on the version, the lateral (bronze-colored) clamping
elements are equipped with a locking mechanism. Make sure that the
locking lever is released when tting the clamping element. See (Abb.
84).
To lock or release the clamping
element, move locking lever to its
travel limit.
(1) Released
(2) Locked
Abb. 84: Clamping element with locking mechanism
Position and sequence of clamping elements
Attach the clamping elements on the short sides rst, then on the rear pantograph
rail, and nally those on the front. Compliance with this sequence prevents
unnecessary distortion of the embroidery material.
Abb. 85: Position of clamping elements
(1) Bronze color (2) Aluminium color
1
2
2
1
To Next Page
Loading...
