ZSK JAFA - Page 145

143
Machine overview
Operation Function
Press Stops the machine
Press Starts the machine
Press Switches pantograph positioning keys
on/o
Press briey
Hold down
Executes a single stitch
Executes a sequence of single stitches
(embroidering at low speed)
Press briey
Hold down
Moves the pantograph back one stitch
at a time (reverse embroidery)
Executes a sequence of reverse
stitches
You can stop the machine at any time with the Stop key. The
interrupted embroidering routine is resumed as soon as the machine
is restarted with the Start key.
Pantograph positioning key cluster
Do not select manual pantograph positioning while the machine is
running. This would stop the machine and interrupt the embroidering
routine.
The key cluster for positioning the pantograph manually is situated on the control
unit. It consists of the arrow keys for positioning the pantograph and the Appliqué
key.