Mixed(802.11g+802.11n)
Mixed(802.11b+802.11g)
Mixed(802.11b+802.11g+802.11n)
Steps
1.
On the navigation tree, click [Network→ WLAN→ Basic]. The basic WLAN parameter
configuration page is displayed, see Figure 12.
Figure 12 Basic WLAN Parameter Configuration
Table 10 lists the basic WLAN parameters.
Table 10 Basic WLAN Parameter
Select Enabled to enable the wireless RF function.
Select this option, and the wireless clients with the different
SSIDs will can not access each other.
Select the wireless RF transmission mode.
Select the country or region.
You can select 20Mhz or 40Mhz.
Enable this option to increase the traffic flow.
Time interval for the wireless device to broadcast the SSID
information.
Keep the default value.
To Next Page
Loading...
