Zte ZXR10 8900 Series - Configuring DOT1 x

ZXR108900SeriesCommandReference(BasicCongurationVolumeII)
Syntax
Description
<interface-number>PhysicalinterfaceNo.,suchasfei,gei,and
smartgroup
Example
Thisexampledescribeshowtosettheinterfacefei_4/1totrust
mode.
ZXR10(config)#ipdhcpsnoopingtrustfei_4/1
Related
Commands
ipdhcpsnoopingbinding
ipdhcpsnoopingclear
ipdhcpsnoopingenable
ipdhcpsnoopingvlan
Purpose
UsethiscommandtoenableDHCPSNOOPINGofthespecied
VLAN.
CommandModes
Globalconguration
Syntax
ipdhcpsnoopingvlan<vlan>
noipdhcpsnoopingvlan<vlan>
Syntax
Description
<vlan>
VLANofusers,1~4094,arangecanbe
entered.
Instructions
ThiscommandtakeseffectonlyifDHCPSNOOPINGiscongured
asENABLEinglobalcongurationmode.
Example
ThisexampledescribeshowtoenableDHCPSNOOPINGofVLAN10
inglobalcongurationmode.
ZXR10(config)#ipdhcpsnoopingvlan10
Related
Commands
ipdhcpsnoopingbinding
ipdhcpsnoopingclear
ipdhcpsnoopingenable
ipdhcpsnoopinginformationoption
ipdhcpsnoopinginformationformat
ipdhcpsnoopinginformationpolicy
ipdhcpsnoopingvlan
ipdhcpuserquota
Purpose
UsethiscommandtosettheDHCPuserquotaontheinterface,
thatis,themaximumnumberofDHCPClientsontheinterface.
ThiscommandisalwaysvalidtotheDHCPserverprocess,andis
104CondentialandProprietaryInformationofZTECORPORATION