Zte ZXR10 8900 Series - Set Interface Flowcontrol; Set Interface Jumbo-Frame

ZXR108900SeriesCommandReference(BasicCongurationVolumeII)
Example
Thisexampledescribeshowtosetportsfei_1/1,fei_1/2and
fei_1/3tothefull-duplexmode.
ZXR10(config)#setinterfaceduplexfullfei_1/1-3
Related
Commands
duplex
setinterfaceflowcontrol
Purpose
UsethiscommandtosetowcontrolofEthernetportsinbatch.
CommandModes
Globalconguration
Syntax
setinterfaceflowcontrol{enable|disable}<port-list>
Syntax
Description
enable
EnablesowcontrolonEthernetports
disable
DisablesowcontrolonEthernetports
<port-list>
Portlistofthebatchconguration
Defaults
ThefunctionofowcontrolisdisabledonallEthernetports.
Example
Thisexampledescribeshowtoenableowcontrolonportsfei_1/1,
fei_1/2andfei_1/3.
ZXR10(config)#setinterfaceflowcontrolenablefei_1/1-3
Related
Commands
flowcontrol
setinterfacejumbo-frame
Purpose
UsethiscommandtosetinbatchwhethertheEthernetportsshall
supportjumboframes.
CommandModes
Globalconguration
Syntax
setinterfacejumbo-frame{enable|disable}<port-list>
Syntax
Description
enableEnablestheEthernetportstosupportjumbo
frames
disableDisablestheEthernetportstosupportjumbo
frames
<port-list>
Portlistofthebatchconguration
Defaults
AllEthernetinterfacesdonotsupportjumboframe.
Example
Thisexampledescribeshowtoenableportsfei_1/1,fei_1/2and
fei_1/3tosupportjumboframes.
ZXR10(config)#setinterfacejumbo-frameenablefei_1/1-3
48CondentialandProprietaryInformationofZTECORPORATION