Zte ZXR10 8900 Series - Unkowncast-Limit; Vt-2

Chapter2InterfaceConguration
esfSetstheframeformattoesfiftheT1channel
worksintheframeformat.
sfSetstheframeformattosfiftheE1channel
worksintheframeformat.
Defaults
Framinginthesfmode.
Instructions
ItisappliedonlytoZXR10GER.
Example
ThisexampledescribeshowtosettheT1channeltoworkinthe
framemodeofesf.
ZXR10(config)#controllercpos3_3/1
ZXR10(config-control)#framingsdh
ZXR10(config-control)#augmappingau-3
ZXR10(config-control)#tug-21t11framingframe
ZXR10(config-control)#tug-21t11framingesf
unkowncast-limit
Purpose
Usethiscommandtocongurethelimit(percent)forunknown
packetsontheEthernetport.Restoredefaultwiththenocom-
mand.
CommandModes
Portconguration
Syntax
unknowcast-limit<percent-value>
nounknowcast-limit
Syntax
Description
<percent-value>
Limitpercentforunknownpackets,1~100,
100bydefault.
Example
Thisexampledescribeshowtosetthelimitforunknownpackets
ontheportfei_1/1to10%.
ZXR10(config)#interfacefei_1/1
ZXR10(config-if)#unkowncast-limit10
Related
Commands
setinterfaceunknowcast-limit
vt-2
Purpose
Usethiscommandtoenterthevt-2congurationmodewhenthe
cpos3interfaceisconguredwiththesonetmode.Exitthevt-2
congurationmodewiththenocommand.
CommandModes
Channelizationconguration
Syntax
vt-2<number>
novt-2<number>
Syntax
Description
<number>Thevalueis1.
CondentialandProprietaryInformationofZTECORPORATION71