Zte ZXR10 8900 Series - Chapter 7 DHCP Configuration; DHCP Overview

Chapter2InterfaceConguration
Defaults
SFthresholdis4bydefault.
Instructions
SD(10bervalue)thresholdshouldbeshorterthanSF(10
bervalue).
ItisappliedtoPOSandATMinterface.
Example
ThisexampledescribeshowtosetthefailuresignalBERthreshold
as3.
ZXR10(config)#intpos48_1/1
ZXR10(config-if)#thresholdsf
ZXR10(config-if)#thresholdsf-ber?
<3-9>Sf-bervalue
ZXR10(config-if)#thresholdsf-ber3
tug-2e1channel-group
timeslots
Purpose
CreateanE1channelwhentheCPOS3interfaceissettotheSDH
mode,andtheAUGisintheAU-4mappingmode.DeleteanE1
channelwiththenocommand.
CommandModes
Channelconguration
Syntax
tug-2<tug-2-number>e1<line>channel-group<channel-nu
mber>timeslots<timeslots>
notug-2<tug-2-number>e1<line>channel-group<channel
-number>
Syntax
Description
tug-2<tug-2-numb
er>
TUG-2number ,ranging1–7
e1<line>E1number ,ranging1–3
channel-group
<channel-number>
E1channelnumber ,1only
timeslots<timeslo
ts>
Timeslotnumber .Timeslots1–31mustbe
assignedtoachannelatonetime.
Instructions
ItisappliedonlytoZXR10GER.
Example
ThisexampledescribeshowtocreateanE1channel.
ZXR10(config)#controllercpos3_3/1
ZXR10(config-control)#framingsdh
ZXR10(config-control)#augmappingau-4
ZXR10(config-control)#au-41tug-31
ZXR10(config-control)#tug-21e11channel-group1timeslots1-31
CondentialandProprietaryInformationofZTECORPORATION67