Zte ZXR10 8900 Series - Chapter 6 Network Protocol Configuration; IP Address Configuration

Chapter2InterfaceConguration
Syntax
Description
<port-name>
Portname
Example
Thisexampledescribeshowtodiagnoselinegei_3/1.
ZXR10(config)#showvctinterfacegei_3/1
CableStatusFault
Pair1-23-64-57-8
StatusOpenOpenGoodGood
Length4m4m<50m<50m
showvlanresource-summary
Purpose
Usethiscommandtodisplaytheinterfacetype,slotnumber ,in-
terfacenumberandtotal.
CommandModes
InterfacecongurationandEXEC
Syntax
showvlanresource-summary
Instruction
Thiscommandontheroutercandisplaythealreadysetether-
netinterfaceandpartiallogicalinterfaces(SuperVLAN,SuperPVC,
SmartGroup,MPPP ,tunnel,loopback,null).
ThiscommandontheswitchonlysupportsVLANinterface.
Example
Thisexampleshowshowtoexecutethiscommandontheswitch.
ZXR69_121#showvlanresource-summary
PorttypeSlotNumber
VLANNA4
TOTAL4
shutdown
Purpose
Usethiscommandtostartorshutdownaninterface.
CommandModes
Interfaceconguration
Syntax
shutdown
noshutdown
Defaults
Thedefaultstateofinterfaceisstart.
Instructions
Thecommandshutdownistoshutdownaninterface(todisable
allfunctions),whichhasnothingtodowiththephysicalstatus(up
ordown)ofaninterface.
Example
Thisexampledescribeshowtostartserialportserial_1/1.
ZXR10(config)#interfaceserial_1/1
ZXR10(config-if)#noshutdown
CondentialandProprietaryInformationofZTECORPORATION61