Zte ZXR10 8900 Series - Char-Len; Clear Counter; Clock Board Source

Chapter2InterfaceConguration
char-len
Purpose
Usethiscommandtosetthedatabitlengthoftheasynchronous
serialport.Restoredefaultwiththenocommand.
CommandModes
Interfaceconguration
Syntax
char-len<length>
nochar-len
Syntax
Description
<length>
Databitlengthoftheasynchronousserial
port,intherangeof5~8andthedefault
valueis8.
Instructions
ItisonlyappliedtoZXR10GAR,ZXR10ZSR.
Example
Setthedatabitoftheserialportserial_1/1to7.
ZXR10(config)#interfaceserial_1/1
ZXR10(config-if)#char-len7
clearcounter
Purpose
Usethiscommandtoclearthestatisticsdataoftheport.
CommandModes
PrivilegedEXEC
Syntax
clearcounter[<interface-name>]
Syntax
Description
<interface-name>Interfacename
Instructions
Whenaninterfacenameisspecied,thestatisticsdataofthespec-
iedinterfacewillbecleared,otherwise,clearstatisticsdataofall
theinterfaces.
Example
Thisexampledescribeshowtoclearthestatisticsdataoninterface
fei_5/1.
ZXR10#clearcounterfei_5/1
Related
Commands
showinterface
clockboardsource
Purpose
Usethiscommandtoselectsingleboardsource.
CommandModes
Globalconguration
Syntax
clockboardsource{free-run|system|line<interface-nam
e>}
noclockboardsource
CondentialandProprietaryInformationofZTECORPORATION15