Zte ZXR10 8900 Series - Configuring Cluster Management

Chapter3DHCPandDHCPSNOOPINGConguration
Syntax
showipdhcpserveruser[<port-name>]
Syntax
Description
<port-name>
Portname
Example
Thisexampledescribeshowtodisplayinterfacefei_1/1’sDHCP
useraccess.
ZXR10(config)#showipdhcpserveruserfei_1
Currentonlineusersare0.
IndexMACaddrIPaddrStateExpiration
Related
Commands
ipdhcprelayagent
ipdhcpenable
ipdhcprelayserver
showipdhcpsnooping
configure
Purpose
UsethiscommandtoshowglobalcongurationofDHCPSNOOP-
ING.
CommandModes
Globalconguration
Syntax
showipdhcpsnoopingconfigure
Instructions
Itisonlyappliedtoswitches.
Example
Thisexampledescribeshowtoshowglobalcongurationinforma-
tionofDHCPSNOOPING.
ZXR10(config)#showipdhcpsnoopingconfigure
dhcpsnoopingconfigureinformation
dhcpsnoopinggloballystate:disable(stop)
notinsertrelayinformationinBOOTREQUEST.
relayinformationpolicy:default(replace)
relayinformationformat:default(china-tel)
Related
Commands
ipdhcpsnoopingbinding
ipdhcpsnoopingclear
ipdhcpsnoopingenable
iipdhcpsnoopinginformationoption
ipdhcpsnoopinginformationformat
ipdhcpsnoopinginformationpolicy
ipdhcpsnoopinginformationuser-configurationpolicy
CondentialandProprietaryInformationofZTECORPORATION113