Zte ZXR10 8900 Series - Set Interface Cancel; Set Interface Duplex

Chapter2InterfaceConguration
Related
Commands
broadcast-limit
setinterfacecancel
Purpose
Usethiscommandtocongurethelinkup/linkdownalarmand
theSNMPTRAPinformationoftheshieldingethernetinterfacein
batchscale.
CommandModes
Globalconguration
Syntax
setinterfacecancel<up-down-type><port-list>
Syntax
Description
<up-down-type>Thevalueisdown-alarmorup-alarm.
down-alarm:shieldsthelinkdownalarmand
SNMPTRAPinformation
up-alarm:shieldsthelinkupalarmandSNMP
TRAPinformation.
<port-list>
Speciestheportlisttocongureinbatch
scale.
Example
Thisexampleshowshowtocongurethelinkupalarmandthe
SNMPTRAPinformationoftheshieldinginterfacefei_1/1,fei_1/2
andfei_1/3.
ZXR10(config)#setinterfacecancelup-alarmfei_1/1-3
Related
Commands
Cancel
setinterfaceduplex
Purpose
UsethiscommandtosettheworkmodeofEthernetportsinbatch.
CommandModes
Globalconguration
Syntax
setinterfaceduplex{half|full}<port-list>
Syntax
Description
halfSetstheworkmodeofEthernetportstothe
halfduplexmode.
fullSetstheworkmodeofEthernetportstothe
fullduplexmode.
<port-list>
Portlistofthebatchconguration
Defaults
Thedefaultisfullduplexmode.
Instructions
FastEthernetelectricalinterfaces,andGigabyteEthernetelectrical
interfacessupportbothhalfandfullduplexworkmodes.FastEth-
ernetopticalinterfaces,GigabyteEthernetopticalinterfacesand
10GigabyteEthernetinterfacessupportonlythefullduplexmode.
CondentialandProprietaryInformationofZTECORPORATION47