Zte ZXR10 8900 Series - Sts-1; Sts-3

ZXR108900SeriesCommandReference(BasicCongurationVolumeII)
ZXR10(config)#interfaceserial_1/1
ZXR10(config-if)#stopbits1
sts-1
Purpose
Afterthecpos3interfaceissettotheSONETmode,youcanuse
thests-1commandtoenterthecongurationmodeofSTS-1,and
usethenocommandtoexitthecongurationmode.
CommandModes
Channelizationconguration
Syntax
sts-1<number>
nosts-1<number>
Syntax
Description
<number>
Ranging1–3
Instructions
ItisappliedonlytoZXR10GER.
Example
Thisexampledescribeshowtoenterthecongurationmodeof
STS-1thatisnumbered1.
ZXR10(config)#controllercpos3_3/1
ZXR10(config-control)#framingsonet
ZXR10(config-control)#sts-11
sts-3
Purpose
Usethiscommandtocreatecpos48subinterfaceswhenthe
cpos48interfaceisconguredtosonetmode.
CommandModes
P48sdhcontrollerconguration
Syntax
sts-3<number-list>
nosts-3<number-list>
Syntax
Description
<number-list>
Rangingfrom1~16,suchas1-4,5-8,9-12,
13-16and1-16.
Instructions
ItisappliedonlytoZXR10T128.
Example
�Thisexampleshowshowtocreateacp48subinterfacethat
takesupNo.1channel.
ZXR10(config)#controllercpos3_3/1
ZXR10(config-control)#framingsonet
ZXR10(config-control)#sts-31
�Thisexampleshowshowtocreateacp48subinterfacethat
takesup1-4channels.
ZXR10(config)#controllercpos3_3/1
ZXR10(config-control)#framingsonet
ZXR10(config-control)#sts-31-4
64CondentialandProprietaryInformationofZTECORPORATION