Zte ZXR10 8900 Series - System Parameter Configuration

ZXR108900SeriesCommandReference(BasicCongurationVolumeII)
ZXR10(config-if)#
�Thisexampledescribeshowtoentersubinterface100ofinter-
facefei_2/1.
ZXR10(config)#interfacefei_2/1.100
ZXR10(config-subif)#
�Thisexampledescribeshowtosetthealiasoffei_1/1to
ether1,withwhichenterthecongurationmodeoftheinter-
face.
ZZXR10(config)#interfacefei_1/1
ZXR10(config-if)#bynameether1
ZXR10(config-if)#exit
ZXR10(config)#interfacebynameether1
ZXR10(config-if)#
Related
Commands
byname
interfacemac-addressoffset
Purpose
UsethiscommandtosettheMACaddressoffsetoftheEthernet
interface.
CommandModes
Interfaceconguration
Syntax
interfacemac-addressoffset<mac-offset>
nointerfacemac-addressoffset
Syntax
Description
<mac-offset>TheMACaddressoffsetoftheinterface,in
therangeof1~30,0bydefault.
Example
ThisexampledescribeshowtosettheMACaddressoffsetofin-
terfacefei_2/2to6.
ZXR10(config)#interfacefei_2/2
ZXR10(config-if)#interfacemac-addressoffset6
inter-subqinq-routing
Purpose
UsethiscommandtoenableordisabletheARPproxyfunction
betweenQinQinterfaces.
CommandModes
Superqinqinterfaceconguration
Syntax
inter-subqinq-routing{enable|disable}
Syntax
Description
enable
EnablestheARPproxyfunctionbetweenQinQ
interfaces.
disable
DisablestheARPproxyfunctionbetween
QinQinterfaces.
Defaults
EnabletheARPproxyfunctionbetweenqinqinterfaces.
30CondentialandProprietaryInformationofZTECORPORATION