Zte ZXR10 8900 Series - National Bit; Native Vlan ID

Chapter2InterfaceConguration
Related
Commands
setinterfacemulticast-limit
nationalbit
Purpose
UsethiscommandtosetparameternationalbitoftheCE3chan-
nel.Restorethedefaultwiththenocommand.
CommandModes
Channelconguration
Syntax
nationalbit{0|1}
nonationalbit
Syntax
Description
0
Setsnationalbitto0
1
Setsnationalbitto1
Defaults
Thedefaultis1.
Instructions
ItisappliedtoZXR10GERandZXR10T64E/T128.
Example
ThisexampledescribeshowtosetnationalbitoftheCE3channel
to0.
ZXR10(config)#controllerce3_3/1
ZXR10(config-control)#nationalbit0
nativevlanid
Purpose
UsethiscommandtoconguredynamicvlanidonEthernetinter-
face.
CommandModes
Interfaceconguration
Syntax
nativevlanid<vlan-id>
nonativevlanid
Syntax
Description
<vlan-id>
VLANnumber ,intherangeof1~4095.
Defaults
Thedefaultvalueis4095.
Instructions
Itisappliedtomegabitandgigabitinterfaces.
Example
Thisexampleshowshowtosetthenativevlanidofamegabit
interfacefei_1/1.
ZXR10(config)#interfacefei_1/1
ZXR10(config-if)#nativevlanid111
CondentialandProprietaryInformationofZTECORPORATION41