Zte ZXR10 8900 Series - ARP Configuration

Chapter2InterfaceConguration
stm-1
Purpose
Usethiscommandtocreatecpos48subinterfaceswhenthe
cpos48interfaceisconguredtosdhmode.
CommandModes
P48sdhcontrollercongurationconguration
Syntax
stm-1<number-list>
nostm-1<number-list>
Syntax
Description
<number-list>
Rangingfrom1~16,suchas1-4,5-8,9-12,
13-16and1-16.
Instructions
ItisappliedonlytoZXR10T128.
Example
�Thisexampleshowshowtocreateacp48subinterfacethat
takesupNo.1channel.
ZXR10(config)#controllercpos3_3/1
ZXR10(config-control)#framingsdh
ZXR10(config-control)#stm-11
�Thisexampleshowshowtocreateacp48subinterfacethat
takesup1-4channels.
ZXR10(config)#controllercpos3_3/1
ZXR10(config-control)#framingsdh
ZXR10(config-control)#stm-11-4
�Thisexampleshowshowtocreateacp48subinterfacethat
takesup1-16channels.
ZXR10(config)#controllercpos3_3/1
ZXR10(config-control)#framingsdh
ZXR10(config-control)#stm-11-16
stopbits
Purpose
Usethiscommandtosettheintervalfortheasynchronousserial
porttotransmiteverytwocharacters(herethetimeismeasured
bybit).
CommandModes
Interfaceconguration
Syntax
stopbits{1|2}
Syntax
Description
1
Stopsthetimefortheasynchronousserial
porttotransmit1bit
2
Stopsthetimefortheasynchronousserial
porttotransmit2bits
Defaults
Thedefaultis1.
Instructions
ItisappliedonlytoZXR10GAR,ZXR10ZSR.
Example
Thisexampledescribeshowtosetthestopbitsofasynchronous
serialportserial_1/1to1.
CondentialandProprietaryInformationofZTECORPORATION63