Zte ZXR10 8900 Series - Vtg T1 Channel-Group Timeslots; Vtg T1 Clock Source

ZXR108900SeriesCommandReference(BasicCongurationVolumeII)
ZXR10(config)#controllercpos3_3/1
ZXR10(config-control)#framingsonet
ZXR10(config-control)#sts-11
ZXR10(config-control)#modevt-2
ZXR10(config-control)#vtg1e11framingframe
ZXR10(config-control)#vtg1e11framingcrc4
vtgt1channel-group
timeslots
Purpose
UsethiscommandtocreateaT1channelwhenthecpos3inter-
faceisconguredwiththesonetmodeandthests-1iscongured
withthevt-15mode.DeletethespeciedT1channelwiththeno
command.
CommandModes
Channelizationconguration
Syntax
vtg<vtg-number>t1<line>channel-group<channel-numb
er>timeslots<timeslots>
novtg<vtg-number>t1<line>channel-group<channel-num
ber>
Syntax
Description
vtg<vtg-number>vtgnumber ,1~7.
t1<line>T1number ,1~4.
channel-group
<channel-number>
T1channelnumber ,only1.
timeslots<timeslo
ts>
Timeslotnumberdistributesthetimeslotsof
1to24toachannelontheone-offbasis.
Instructions
ItisappliedonlytoZXR10GER.
Example
ThisexampledescribeshowtocreateaT1channel.
ZXR10(config)#controllercpos3_3/1
ZXR10(config-control)#framingsonet
ZXR10(config-control)#sts-11
ZXR10(config-control)#modevt-15
ZXR10(config-control)#ctg1t11channel-group1timeslots1-24
vtgt1clocksource
Purpose
UsethiscommandtosettheclocksourceofT1channelwhenthe
cpos3interfaceisconguredwiththesonetmodeandthests-1
isconguredwiththevt-15mode.Restorethedefaultvaluewith
thenocommand.
CommandModes
Channelizationconguration
Syntax
vtg<vtg-number>t1<line>clocksource{internal|line}
74CondentialandProprietaryInformationofZTECORPORATION