Zte ZXR10 8900 Series - Port Loop Detection Configuration

ZXR108900SeriesCommandReference(BasicCongurationVolumeII)
Enabletheopticalmoduleontheinterfacerst,thenitwilldisplay
theopticalmoduleinformation:optical-informmonitor{ena
ble|disable}.
Example
ThisexampleshowshowtocancelthelinkupalarmandtheSNMP
TRAPinformationoftheshieldinginterfacefei_1/1,fei_1/2and
fei_1/3.
ZXR10#Showoptical-informbrief
OpticalOptical
InterfaceTemperatureVoltageCurrentTxPowerRxPower
Name(Celsius)(Volts)(mA)(mW)(mW)
------------------------------------------------------------
gei_2/1/2112.005.0060.000.001.00
gei_2/1/2212.005.0060.000.001.00
gei_2/1/2312.005.0060.000.001.00
gei_2/1/2412.005.0060.000.001.00
ZXR10#Showoptical-informbriefinterfacegei_2/1/23
OpticalOptical
InterfaceTemperatureVoltageCurrentTxPowerRxPower
Name(Celsius)(Volts)(mA)(mW)(mW)
-------------------------------------------------------------
gei_2/1/2312.005.0060.000.001.00
Differentdisplayinginformationfordifferentopticalmodules.The
opticalmoduleinformationisprovidedbythedrive.
showoptical-informdetail
Purpose
Usethiscommandtodisplaytheopticalmoduleinformation:tem-
perature,voltage,circuit,sendingandreceivingpower .Itsupports
theviewofsingleportandveneer .
CommandModes
PrivilegedEXEC
Syntax
showoptical-informdetail[temperaturevoltagecurrent
rx-powertx-power][npc<slot>|interface<interface-nam
e>]
Syntax
Description
interface<
interface-name>
theinterfacename
npc<slot>
theslotnumberofthelinecard
temperature
thetemperatureoftheopticalmodule
voltage
thevoltagoftheopticalmodule
current
thecircuitoftheopticalmodule
rx-power
thereceivingpoweroftheopticalmodule
tx-power
thesendingpoweroftheopticalmodule
Instruction
Itonlysupportsthephysicalinterface.
Enabletheopticalmoduleontheinterfacerst,thenitwilldisplay
theopticalmoduleinformation:optical-informmonitor{ena
ble|disable}.
58CondentialandProprietaryInformationofZTECORPORATION