Zte ZXR10 8900 Series - Flag C2; Flag J0

ZXR108900SeriesCommandReference(BasicCongurationVolumeII)
�Thenocommandisusedtosetthe<vlan-id>encapsulated
forthesubinterfaceto0.Inthiscase,thepacketcannotbe
receivedandsent.
�AfterconguringVPN,ACL,NATandQOSattributesonthe
subinterfaceandbeforeremovingtheaboveattributes,itis
unabletoremoveencapsulation(withthenocommand)or
changeencapsulation.
�Thiscommandcannotbeconguredwithanyoneofqinq,
qinqrangeandencapsulationdot1Q.
flagc2
Purpose
UsethiscommandtosetPOS/ATMportsignalaccesssign.
CommandModes
Interface
Syntax
flagc2<value>
noflagc2
Syntax
Description
<value>Therangeis0~255
Defaults
Systemdefaultconguration(0x01).
Instructions
DefaultPOS/ATMSDHas0x01,SONETas0xcc,thiscommand
usedforPOSinterfaceandATMinterface.
Example
ThisexampleshowshowtosetPOSportsignalaccesssign.
ZXR10(config)#intpos48_1/1
ZXR10(config-if)#flag?
c2pathoverheadbyte
j0sectiontracebyte
s1s0SpecifybitS1andS0ofH1
ZXR10(config-if)#flagc2?
<0-255>Bytevalue
ZXR10(config-if)#flagc22
flagj0
Purpose
UsethiscommandtosetPOSportandATMportsectiontracesign
eldJ0.RestorePOSportsectiontracesigneldJ0withtheno
command.
CommandModes
Interfaceconguration
Syntax
flagj0<value>
noflagj0
Syntax
Description
<value>
intherangeof0~255
Defaults
Systemdefaultconguration(0x01)
24CondentialandProprietaryInformationofZTECORPORATION