Zte ZXR10 8900 Series - IPTV Configuration Example

Chapter6VRRPConguration
Related
Commands
showvrrp
vrrpmode
Purpose
Usethiscommandtocongurethemodeofvirtualdevice.There
aretwomodes:standardandprivate.Theunitsofadvertisement
timeintheVRRPprotocolmessagearedifferentinthetwomodes.
CommandModes
Interfaceconguration
Syntax
vrrp<group>mode{standard|private}
novrrp<group>mode
Syntax
Description
<group>
VirtualrouterID,1~255
{standard|private}Standardmodeorprivatemode
Defaults
Standardmode
Instructions
TheunitofadvertisementtimeintheVRRPprotocolmessagein
standardmodeis1s.TheunitofadvertisementtimeintheVRRP
protocolmessageinprivatemodeis100ms.
Example
Thisexampleshowshowtocongurethemodetoprivate.
ZXR10(config)#interfacevlan1
ZXR10(config-if)#vrrp1modeprivate
Related
Commands
showvrrp
vrrpout-interface
Purpose
Usethiscommandtosettheout-interfaceforsendingVRRPpro-
tocolmessage.Restorethedefaultwiththenocommand.
CommandModes
Interfaceconguration
Syntax
vrrp<group>out-interface<interface-name>
novrrp<group>out-interface
Syntax
Description
<group>
VirtualrouterID,1~255
<interface-name>Nameofout-interface
Instructions
SettheinterfaceinwhichtheVRRPgroupshallsendthepacket.
WheninterfacedoesnotmatchtheVRRPgroup,themessagewill
besentfromtheinterfacewhichsetsVRRPgroupbydefault.
Example
ThisexampledescribeshowtosetVRRPout-interface.
ZXR10(config)#interfacevlan1
ZXR10(config-if)#vrrp1out-interfacevlan2
CondentialandProprietaryInformationofZTECORPORATION135