Zte ZXR10 8900 Series - Kick-Off Ip Dhcp Server User

Chapter3DHCPandDHCPSNOOPINGConguration
validtotheDHCPrelayprocessunderspeciccongurationcon-
ditions.DeletetheDHCPuserquotawiththenocommand.
CommandModes
Interfaceconguration
Syntax
ipdhcpuserquota<limit-value>
noipdhcpuserquota
Syntax
Description
<limit-value>
DHCPuserquotaontheinterface,ranging1
~2048
Defaults
Noquota
Instructions
FortheDHCPServe,theDHCPuserquotarestrictsthemaximum
numberofDHCPusersontheinterface,andcontrolsthenumber
ofIPaddressesindirectly.
FortheDHCPrelay,astheDHCPrelayprotocoldoesnotsupport
theprocessingofDHCPuserquota,whichisinvalid.However ,
whentheIPaddressoftheDHCPrelayisboundtotheARP ,the
quotaisvalidaftersomeprocessing.
Example
Thisexampledescribeshowtosettheuserquotaonthefei_2/1
interfaceto50.
ZXR10(config)#interfacefei_1/1
ZXR10(config-if)#ipdhcpuserquota50
Related
Commands
showipdhcpconfigure
kick-offipdhcpserveruser
Purpose
Usethiscommandtomaketheon-lineusersoff-linefromthe
serveraccordingtodesignatedattribute(interface/MACaddress/IP
address/vlanID/invlan_ID/exvlan_ID).
CommandModes
PrivilegedEXEC
Syntax
kick-offipdhcpserveruser[[interface<inf_name>]|[mac
<mac_addr>[vrf-instance<vrf_name>]]|[ip<ip_addr>[vrf-in
stance<vrf_name>]]|[vlan<vlan_ID>]|[invlan<invlan_ID>[e
xvlan<exvlan_ID>]]|[exvlan<exvlan_ID>]]
Syntax
Description
<inf_name>Layer3interfacename
<mac_addr>MACaddress
<vrf_name>
VRFname
<ip_addr>IPaddress
<vlan_ID>
VLANID
<invlan_ID>InternalVLANID
<exvlan_ID>ExternalVLANID
CondentialandProprietaryInformationofZTECORPORATION105