Zte ZXR10 8900 Series - Change-Attribute Copper

Chapter2InterfaceConguration
Instructions
Thiscommandonlysupportsshieldingthelinkup/linkdownalarm
informationoftheinterfaceandSNMPTRAPinformationunderthe
followinginterfaces:thelayer-2fei,layer-2gei,loopback,QinQ,
SuperVlan,SuperQinQ,VLAN,Tunnel,PortCh(SmartGroup).
Example
Thisexampledescribeshowtoshieldthelinkdownalarmand
SNMPTRAPinformationofinterfacefei_1/1.
ZXR10(config)#interfacefei_1/1
ZXR10(config-if)#canceldown-alarm
Related
Commands
snmp-serverhost
snmp-serverenable
loggingtrap-enable
change-attributecopper
Purpose
Usethiscommandtocongureagigabitopticalporttosupport
1000Base_TSFPmodule.Throughthisconguration,theportcan
support1000M,100Mand10Mautomaticnegotiation.
CommandMode
Interfacecongurationmode
Syntax
change-attributecopper
nochange-attribute
Instructions
1000Base_TSFPmodulescanbepluggedintogigabitSFPportson
S2boards.Throughconguration,theportscansupport1000M,
100Mand10Mautomaticnegotiation.Atpresent,thefollowing
boardssupportthisfunction:
�RS-69S1-24GE-SFP
�RS-69S1-48GE-SFP
�RS-69S2-48GE-SFP
�RS-69S2-24GE-SFP
�RS-XGS1-24GE-SFP
�RS-XGS1-48GE-SFP
�RS-89S1-24GE-SFP
�RS-89S1-48GE-SFP
�RS-89S2-24GE-SFP
�RS-89S2-48GE-SFP
�RS-XGS2-48GE-SFP
�RS-XGS2-24GE-SFP
Example
Thisexampledescribeshowtoconguretheportgei_1/2tosup-
portthe1000Base_TSFPmodule.
ZXR10(config-gei_1/2)#change-attributecopper
CondentialandProprietaryInformationofZTECORPORATION13