Zte ZXR10 8900 Series - Threshold; Threshold Sd-Ber; Threshold Sf-Ber

ZXR108900SeriesCommandReference(BasicCongurationVolumeII)
threshold
Purpose
Usethiscommandtosetthethreshold.Restorethedefaultwith
thenocommand.
CommandModes
Channelizationconguration
Syntax
threshold<value>
nothreshold
Syntax
Description
<value>
Ranging0–100,0bydefault
Instructions
ItisappliedonlytoZXR10GER.
Example
ThisexampledescribeshowtosetthethresholdofchannelCPOS3
to10.
ZXR10(config)#controllercpos3_3/1
ZXR10(config-control)#threshold10
thresholdsd-ber
Purpose
UsethiscommandtosetthesignalBERthreshold.
CommandModes
Interfaceconguration
Syntax
thresholdsd-ber<value>
Syntax
Description
<value>
Ranging3–9,6bydefault
Defaults
SDthresholdis6bydefault.
Instructions
SD(10bervalue)thresholdshorterthanSF(10bervalue).Itis
appliedtoPOSandATMinterface
Example
ThisexampledescribeshowtosetthesignalBERthresholdas4.
ZXR10(config)#intpos48_1/1
ZXR10(config-if)#thresholdsd
ZXR10(config-if)#thresholdsd-ber?
<3-9>Sd-bervalue
ZXR10(config-if)#thresholdsd-ber4
thresholdsf-ber
Purpose
UsethiscommandtosetthefailuresignalBERthreshold.
CommandModes
Interfaceconguration
Syntax
thresholdsf-ber<value>
Syntax
Description
<value>
Ranging3–9,4bydefault
66CondentialandProprietaryInformationofZTECORPORATION