ZyXEL Communications ZyWall ATP series - Set up the Ipsec VPN Tunnel on the Fortigate

177/782
www.zyxel.com
Go to CONFIGURATION > VPN > IPSec VPN > VPN Gateway and click Show
Advanced Settings. Configure Authentication > Peer ID Type as Any to let the
ZyWALL/USG does not require to check the identity content of the remote IPSec router.
CONFIGURATION > VPN > IPSec VPN > VPN Gateway > Show Advanced Settings >
Authentication > Peer ID Type
Set Up the IPSec VPN Tunnel on the FortiGate
In the FortiGate VPN > IPsec > Wizard > Custom VPN Tunnel (No Template), use the
VPN Setup to create a Site-to-site VPN rule Name.
VPN > IPsec > Wizard > Custom VPN Tunnel (No Template)