ZyXEL Communications ZyWall ATP series - Set up the Bridge Interface on the Zywall;Usg

643/782
www.zyxel.com
reach this server directly by its public IP address.
ZyWALL/USG with Bridge Interface Example
Set Up the Bridge Interface on the ZyWALL/USG
In the ZyWALL/USG, go to CONFIGURATION > Network > Interface > Bridge > add
Note: All network IP addresses and subnet masks are used as examples in this article.
Please replace them with your actual network IP addresses and subnet masks. This example
was tested using USG310 (Firmware Version: ZLD 4.25).