357/782
Set Up the SSL VPN Tunnel on the ZyWALL/USG
In the ZyWALL/USG, go to CONFIGURATION > VPN > SSL VPN > Access Privilege to
add an Access Policy. Configure a Name for you to identify the SSL VPN
configuration.
CONFIGURATION > VPN > SSL VPN > Access Privilege > Access Policy >
Configuration
Go to Create new Object > User to add User Name (SSL_VPN_1_Users in this
example) and Password (4-24 characters, zyx168 in this example), click OK.
CONFIGURATION > VPN > SSL VPN > Access Privilege > Access Policy > Create
new Object > User
To Next Page
Loading...
