ZyXEL Communications ZyWall ATP series - DHCP Option 60 Deployment Flow; Setting up DHCP Option 60 on the Web GUI

711/782
www.zyxel.com
Figure 1 DHCP Option 60 Vendor Class Identifier
DHCP Option 60 Deployment Flow
1 Enable the WAN ports as DHCP clients (enabled by default).
2 Navigate to the WAN interface configuration screen.
3 Type in user defined option 60 string in the Advance setting section.
Setting Up DHCP Option 60 on the Web GUI
1 In the ZyWALL/USG’s navigation panel, go to Configuration > Network >
Interface.