ZyXEL Communications ZyWall ATP series - Enable the USB Firmware Upgrade Function by CLI Command; Save the Firmware on the USB

705/782
www.zyxel.com
Enable the USB Firmware Upgrade Function by CLI Command
For security concerns, the function is disabled by default. The administrator needs
to enable the function by the following CLI command:
Router(config)# usb-storage update-firmware enable
Save the Firmware on the USB
There are two ways to create the firmware folder on the USB storage.
1 Follow the folder structure to create the firmware folder manually. It does
not matter if the letters of the folder name are capitalized or not. For
example: D:\vpn300_dir\firmware
Create the Firmware Folder Manually: Root Directory\vpn300_dir\firmware
2 Plug the USB storage to the device and the device will automatically
create the folder Vpn300_dir, which includes the following sub-folders.
Save the .bin file to the firmware folder.
centralized_log
core_dump
diagnostic_info
firmware
packet_trace