ZyXEL Communications ZyWall ATP series - Upload the Configuration Files from the Zywall;Usg; What Could Go Wrong

611/782
www.zyxel.com
Upload the Configuration Files from the ZyWALL/USG
In the ZyWALL/USG, go to MAINTENANCE > File Manager > Configuration File >
Upload Configuration File, select Browse to upload a new or previously saved
configuration file from your computer to your ZyWALL/USG. You cannot upload a
configuration file named system-default.conf or lastgood.conf. If you upload
startup-config.conf, it will replace the current configuration and immediately
apply the new settings.
MAINTENANCE > File Manager > Configuration File
What Could Go Wrong?
If you cannot apply a configuration file and the device shows error message, go
to Monitor > Log to check the [alert] log message and make the correction of the
Note: Do not shut down the ZyWALL/USG while the configuration file is being applied.