ZyXEL Communications ZyWall ATP series - Set up the Content Filter on the Zywall;Usg; Set up the SSL Inspection on the Zywall;Usg

511/782
www.zyxel.com
Set Up the Content Filter on the ZyWALL/USG
In the ZyWALL/USG, go to CONFIGURATION > UTM Profile> Content Filter > Profile
Management > Add Filter File > Custom Service. Configure a Name for you to
identify the Content Filter Profile and select Enable Custom Service.
CONFIGURATION > UTM Profile> Content Filter > Profile > Profile Management >
Add Filter File > Custom Service > General Settings
Scroll down to the Blocked URL Keywords section, click Add and use "*" as a
wildcard to match any string in trusted/forbidden web sites and blocked URL
keywords (*.facebook*.com in this example). Click OK.
CONFIGURATION > UTM Profile> Content Filter > Profile > Profile Management >
Add Filter File > Custom Service > Blocked URL Keywords
Set Up the SSL Inspection on the ZyWALL/USG
In the ZyWALL/USG, go to CONFIGURATION > UTM Profile > SSL Inspection > Add
rule, configure a Name for you to identify the SSL Inspection profile.
Then, select the CA Certificate to be the certificate used in this profile. Select