ZyXEL Communications ZyWall ATP series - Test the L2 TP over Ipsec VPN Tunnel

276/782
www.zyxel.com
After you create a VPN configuration, slide the button right to the on position to
initiate L2TP VPN session.
Test the L2TP over IPSec VPN Tunnel
Go to ZyWALL/USG CONFIGURATION > VPN > IPSec VPN > VPN Connection, the
Status connect icon is lit when the interface is connected.
CONFIGURATION > VPN > IPSec VPN > VPN Connection
Go to ZyWALL/USG MONITOR > VPN Monitor > IPSec and verify the tunnel Up Time
and the Inbound(Bytes)/Outbound(Bytes) traffic. Click Connectivity Check to
verify the result of ICMP Connectivity.