ZyXEL Communications ZyWall ATP series - Set up the Security Policy on the Zywall;Usg

648/782
www.zyxel.com
Set Up the Security Policy on the ZyWALL/USG
In the ZyWALL/USG, go to CONFIGURATION > Security Policy > Policy Control >
add corresponding, select Enable. Configure a Name for your to identify the
security policy (http_server_access in this example). Set From: WAN and To: LAN1.
Set Destination to the lan subnet where your server is (LAN_SUBNET_GE3 in this
example). Set Service to HTTP, set Action to allow. Click OK.
CONFIGURATION > Security Policy > Policy Control > add corresponding