510/782
How To Block Facebook
This is an example of using a ZyWALL/USG UTM Profile in a Security Policy to block
access to a specific social network service. You can use Content Filter, SSL
Inspection and Policy Control to make sure that a certain web page cannot be
accessed through both HTTP and HTTPS protocols.
ZyWALL/USG with Block Facebook Settings Example
Note: All network IP addresses and subnet masks are used as examples in this article.
Please replace them with your actual network IP addresses and subnet masks. This example
was tested using USG310 (Firmware Version: ZLD 4.25).
To Next Page
Loading...
