ZyXEL Communications ZyWall ATP series - Plug the USB into the Device; Firmware Version

706/782
www.zyxel.com
Firmware Folder is Created Automatically
Plug the USB into the Device
Once the .bin file in the firmware folder is detected, the device will copy it to the RAM.
Plug the USB storage into the USB port
The following message shows on the console if the device fails to copy the .bin file.
Router> USB update-firmware failed: firmware copy fail
The Device Checks Running Partition for the Model ID and the
Firmware Version
The device checks the USB firmware with the running partition only. It does not check
the standby partition.