ZyXEL Communications ZyWall ATP series - Set up the Security Policy on the Zywall;Usg

513/782
www.zyxel.com
Set Up the Security Policy on the ZyWALL/USG
In the ZyWALL/USG, go to CONFIGURATION > Security Policy > Policy Control,
configure a Name for you to identify the Security Policy profile. For From and To
policies, select the direction of travel of packets to which the policy applies.
Select the Schedule that defines when the policy applies (Facebook_Block in this
example).
Scroll down to UTM Profile, select Content Filter and select a profile from the list
box (Facebook_Block in this example). Then, select SSL Inspection and select a
profile from the list box (Facebook_Block in this example).
CONFIGURATION > Security Policy > Policy Control