ZyXEL Communications ZyWall ATP series - Set up the Packet Capture Feature

465/782
www.zyxel.com
ZyWALL/USG Packet Capture Feature Settings
Set Up the Packet Capture Feature
8 Go to MAINTENANCE > Diagnostics > Packet Capture > Capture > Interfaces.
Select interfaces for which to capture packets and click the right arrow button to
move them to the Capture Interfaces list.
Note: New capture files overwrite existing files of the same name. Change the File
Suffix field’s setting to avoid this. This example was tested using USG110 (Firmware
Version: ZLD 4.25).