502/782
Leave all UTM Profiles disabled.
CONFIGURATION > Security Policy > Policy Control > Add corresponding >
Employees_Security
Test the Result
Connect to the Internet from two computers: one from executive_1 and one from
an employee address (192.168.30.9).
Go to the ZyWALL/USG Monitor > Log, you will see [notice] log message such as
below. In this example result, a connection from executive_1 has user login
message and always with ACCESS FORWARD information. A connection from
employee address (192.168.30.9) and some of the services are with ACCESS
BLOCK information
To Next Page
Loading...
