ZyXEL Communications ZyWall ATP series - 2.1.3 Internet Access: PPPoE

49/782
www.zyxel.com
What Could Go Wrong?
If you see below [info] or [error] log message, please check ZyWALL/USG Phase 1
Settings. Make sure your ZyWALL/USG Phase 1 Settings are supported in the MS
Azure IKE Phase 1 setup list.
MONITOR > Log
If you see that Phase 1 IKE SA process done but still get below [info] log message,
please check ZyWALL/USG Phase 2 Settings. Make sure your ZyWALL/USG Phase 2
Settings are supported in the MS Azure IKE Phase 2 setup list.
MONITOR > Log