ZyXEL Communications ZyWall ATP series - Test the Result

605/782
www.zyxel.com
Test the Result
Add a Security Policy rule to view the SIP log:
CONFIGURATION > BWM > Configuration > Add Policy
Dial Phone Number 1001 (192.168.10.2 in this example) from Phone Number 1002
(192.168.100.2 in this example), go to the ZyWALL/USG Monitor > Log, you will see
[alert] log message such as below. The Destination IP address is the SIP Server IP
address.
Monitor > Log
Go to the ZyWALL/USG Monitor > Traffic Statics and review the SIP traffic and other
services to optimize the Guaranteed and Maximum BMW of bandwidth
consuming services.
Monitor > Traffic Statics