759/782
What Can Go Wrong?
1. For device HA or HA Pro, signature synchronization is required.
2. Cloud query is not supported.
3. It doesn't support for IPv6.
Caution:
Any Fail, please disconnect all the links. Then reset device to factory
default and try again.
Don’t copy configuration file from first device and upload to second
device to deploy.
Note: All network IP addresses and subnet masks are used as examples in this article.
Please replace them with your actual network IP addresses. This example was tested using
the ATP500 (Firmware Version: ZLD 4.35).
To Next Page
Loading...
