475/782
How To Schedule YouTube Access
This is an example of using the ZyWALL/USG UTM Profile and Security Policy to control
access to the network. If an application should not have network access during
certain hours, you can use Application Patrol, SSL Inspection and Schedule settings to
make sure that these applications cannot access the Internet.
ZyWALL/USG with Scheduled YouTube Access Settings Example
Set Up the Schedule on the ZyWALL/USG
In the ZyWALL/USG, go to CONFIGURATION > Object > Schedule > Recurring > Add
Schedule Recurring Rule. Configure a Name for you to identify the Schedule
Recurring Rule. Specify the Day Time hour and minute when the schedule begins
and ends each day. In the Weekly schedule, select each day of the week that the
recurring schedule is effective.
CONFIGURATION > Object > Schedule > Recurring
Note: All network IP addresses and subnet masks are used as examples in this article.
Please replace them with your actual network IP addresses and subnet masks. This example
was tested using USG310 (Firmware Version: ZLD 4.25).
To Next Page
Loading...
