435/782
Set Up the ZyWALL/USG Email Logs Setting
1. Go to CONFIGURATION > Log & Report > Log Settings > System Log > Edit > E-mail
Server 1. Select Active. Type the SMTP server name or IP address. In Mail From, type
the e-mail address from which the outgoing e-mail is delivered. In Mail To, type
the e-mail address to which the outgoing e-mail is delivered.
2. Day for Sending Log is available if the log is e-mailed weekly. Select the day of the
week the log is e-mailed.
3. Time for Sending Log is available if the log is e-mailed weekly or daily. Select the time
of day (hours and minutes) when the log is e-mailed. Use 24-hour notation.
4. Select SMTP Authentication if it is necessary to provide a user name and password
to the SMTP server.
CONFIGURATION > Log & Report > Log Settings > System Log > Edit > E-mail Server 1
5. Go to CONFIGURATION > Log & Report > Log Settings > System Log > Edit > Active
Log and Alert. Use the System Log drop-down list to change the log settings for all
of the log categories.
To Next Page
Loading...
