ZyXEL Communications ZyWall ATP series - Appendix. Edit the Configuration File

734/782
www.zyxel.com
Passive (Device 2)- Running Firmware 4.33(ABFU.1)
Appendix. Edit the Configuration File
Open the backup configuration file and search for the following CLI.
username admin encrypted password xxxxxx user type admin
Set a new password and replace the following CLI with the original one. In this
example, 12345 is the password for admin. Then save the settings after the
configuration file is edited.
username admin password yournewpassword user type admin
username user1 password yournewpassword user type admin
username user2 password yournewpassword user type admin