ZyXEL Communications ZyWall ATP series - Set up the Zywall;Usg Remote Server Setting

448/782
www.zyxel.com
Set Up the ZyWALL/USG Remote Server Setting
Go to CONFIGURATION > Log & Report > Log Settings > Remote Server > Edit. Set Log
Format to be VRPT/Syslog. Type the Server Address to be the Vantage Report server
IP address (10.251.30.61 in this example).
Use the System Log drop-down list to change the log settings for all of the log
categories.
CONFIGURATION > Log & Report > Log Settings > Remote Server > Edit