ZyXEL Communications ZyWall ATP series - Set up the USB Log Storage

452/782
www.zyxel.com
Set Up the USB Log Storage
Go to CONFIGURATION > Log & Report > Log Settings, select USB Storage and click
Activate. Click Apply to save your changes.
CONFIGURATION > Log & Report > Log Settings
Go to CONFIGURATION > Log & Report > Log Settings > USB Storage > Edit. Select
Duplicate logs to USB storage (if ready) to have the ZyWALL/USG save a copy of its
system logs to a connected USB storage device. Use the Selection drop-down list to
change the log settings for all of the log categories.
CONFIGURATION > Log & Report > Log Settings