ZyXEL Communications ZyWall ATP series - Page 644

644/782
www.zyxel.com
Bridge, select Interface Type to be the general type, select Zone to be the LAN
zone. In the Member Configuration, select internal server (IntServer1 interface in
this example) and public IP address (Public WAN interface in this example) to be
in the same member group.
In the IP Address Assignment section, select Used Fixed IP Address and configure
br1 IP address (172.124.163.150/24 in this example).
CONFIGURATION > Network > Interface > Bridge > add Bridge
After creating the bridge interface, connect the server's network cable to
IntServer1 port and set the server's IP to be in the same subnet (172.124.163.158 in
this example).