284/782
Now the rule is configured on the ZyWALL/USG. The rule settings appear in the
VPN > L2TP VPN screen. Click Close to exit the wizard.
Quick Setup > VPN Setup Wizard > Welcome > VPN Settings > Wizard Completed
Go to CONFIGURATION > VPN > VPN Gateway > WIZ_L2TP_VPN, change
Authentication method to be Certificate and select the certificate which ZyWALL/USG
uses to identify itself to the Window 10 computer.
CONFIGURATION > VPN > VPN Gateway > WIZ_L2TP_VPN > Authentication >
Certificate
Go to CONFIGURATION > VPN > L2TP VPN > Create new Object > User to add User
Name and Password (4-24 characters). Then, set Allowed User to the newly
created object (L2TP_Remote_Users/zyx168 in this example).
To Next Page
Loading...
